What is the preparation tips for Microsoft 70-489 dumps? “Developing Microsoft SharePoint Server 2013 Advanced Solutions” is the name of Microsoft 70-489 exam dumps which covers all the knowledge points of the real Cisco exam. New Microsoft 70-489 dumps exam questions for Microsoft SharePoint Applications free dowload. Pass4itsure Microsoft 070-489 dumps exam questions answers are updated (97 Q&As) are verified by experts.
The associated certifications of 70-489 dumps is Microsoft SharePoint Applications. Pass4itsure is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification https://www.pass4itsure.com/70-489.html exams.
Exam Code: 70-489
Exam Name: Developing Microsoft SharePoint Server 2013 Advanced Solutions
Q&As: 97
[2017 Hottest Microsoft 70-489 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWMVJwQXUxZ0JQV28
[2017 Hottest Microsoft 70-486 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWSG9tSWFYaFZMREE
Pass4itsure Microsoft 70-489 Dumps Exam Questions – 100% Success Guaranteed
QUESTION 10
You need to configure authentication for the external content type in the production
environment.
Which three actions should you perform in sequence? (To answer, move the appropriate actions
from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
70-489 exam Correct Answer:
Explanation
Explanation/Reference:
Note:
* From scenario:
You must create an external content type named TreyResearch to access the SQL data source.
During development, the data source will be accessible locally.
The solution must use the SQL Server user named sqltrey to connect to the database.
QUESTION 11
You need to add code at line AJ05 to complete the implementation of the app.
How should you complete the relevant code? (To answer, drag the appropriate code segment to
the correct location in the answer area. Each code segment may be used once, more than once, or
not at all. You may need to drag the split bar between panes or scroll to view content.)
Select and Place:
Explanation
Explanation/Reference:
QUESTION 12
You need to create the external content type to support the data model.
In the Return Parameter Configuration dialog box, in the properties section, which options
should you select? (To answer, select the appropriate setting or settings in the answer area.)
Hot Area:
70-489 dumps Correct Answer:
Explanation
Explanation/Reference:
From scenario:
You must create an external content type named TreyResearch to access the SQL data source.
During development, the data source will be accessible locally.
QUESTION 13
You need to add code to line CM07 to create the Research Content document set.
How should you complete the relevant code? (To answer, select the appropriate option from the
dropdown list in the answer area.)
Correct Answer:
Explanation
Explanation/Reference:
QUESTION 14
You need to configure filtering for the Product page.
Which filtering option should you use?
A. products/pages/products.aspx?productID=*&.productCategory=*
B. products.aspx;productID;productCategory; lucernepublishing.com
C. products; productID; productCategory; lucernepublishing.com
D. products/pages/products.aspx?*
E. productID;productCategory
070-489 pdf Correct Answer: E
Explanation
Explanation/Reference:
Question No : 15 You are preparing to replace faulty RAM inside a Mac mini (Mid 2010). What should be
used to open the bottom cover?
A. Putty knife
B. Philips #00 screwdriver
C. Mac mini (Mid 2010) Logic Board Removal Tool
D. Your hands, no tools are required for this procedure
Answer: D
Question No : 16 Which of the following measurements is an example of an appropriate use of a multimeter
when troubleshooting a Mac?
A. Measure logic board battery voltage.
B. Measure high voltage going to a CRT.
C. Measure AC current going to an optical drive.
D. Measure digital signals on the main processor.
070-489 vce Answer: A
Explanation:
When Do You Use a Multimeter?
Verifying Backup Battery VoltageVolts DC
You can measure a computer’s backup or main battery DC voltage to determine if the
battery is dead andrequires replacement. An example of this procedure is outlined above.
Other examples of this procedure canbe found in many Apple service manuals.
Verifying Power Supply Output VoltageVolts DC
You can also measure the DC voltage outputs from a computer’s power supply to
determine if the powersupply is faulty and requires replacement. Examples of this
procedure can be found in the Power Mac G5 (Late2005) Power Supply Verification
procedure.
Verifying AC Input VoltageVolts AC
You can measure AC input voltage into a computer’s power supply to determine if the
computer’s power supplyor AC line filter / AC power input is faulty. Examples of this
procedure can be found in the iMac (Flat Panel)service manual, in the ‘No Power’
troubleshooting symptom charts. Another example can be found in the eMacATI
Graphics/USB 2.0/2005 no power troubleshooting section. The image below was taken
from the eMac ATIGraphics/USB 2.0/2005 service manual.
Question No : 17 You require additional information about a specific problem with a customer’s Mac. Which
one of the following resources is the Apple-recommended choice for researching the
problem?
A. Downloads
B. Discussions
C. User’s manual
D. Apple support articles
070-489 exam Answer: D
Question No : 18 Which section of any Apple Technician Guide is the BEST place to look for instructions for
replacing an internal component?
A. Views
B. Basics
C. Take Apart
D. Troubleshooting
Answer: C
Question No : 19
According to Apple Technician Guides, what should be completed before performing any
take-apart steps when replacing a part in any Apple product?
A. Disconnect and reconnect all internal cables.
B. Lay the product on its side so it will not fall over.
C. Discharge the CRT and establish an ongoing ground.
D. Gather all necessary tools and perform all preliminary steps.
E. Order all available service parts for the appropriate configuration of the product.
70-489 dumps Answer: D
Explanation:
Before You Begin
• Remove any cases or screen protectors, which may inhibit proper testing.
• Verify the user-reported symptom(s) and identify the correct part(s) needed for repair.
• Make sure the device is powered off.
Electrostatic Discharge Precautions
Proper ESD precautions must always be used when opening an iPhone 4. Make sure you
areworking on a properly grounded ESD-safe mat and are wearing a properly connected
ESD-safewrist strap.
For more information about ESD, refer to:
• Apple Support article HT3451: Electrostatic Discharge Precautions and Myths
• AppleCare Service Training: ESD Precautions
Gather Required Tools
Preliminary Steps
Warning: Always shut down the computer before opening it to avoid damaging the internal
components orcausing injury. After you shut down the computer, the internal components
can be very hot. Let the computercool down for 30 minutes before continuing.
Question No : 20
Which TWO details are derived from entering an Apple product’s serial number into the
Online Service Assistant section of the Apple Support web page? SELECT TWO
A. Mac OS version
B. Warranty status
C. AppleCare name
D. Installed memory
E. Number of USB ports
Answer: B,C
Explanation:
Check Your Service and Support Coverage
Review your Apple warranty status and eligibility for support and extended coverage.
Select Online Service Assistant, and you see this page:
untitled
Enter the serial number, you will get a screen similar to the one shown here:
untitled
Once again, you have the correct AppleCare name for the product. It is a Mac Pro (Early
2008).
Question No : 21 A customer asks about RAM speed requirements to upgrade his Mac. To which Apple
support site resource should you refer this customer?
A. Downloads
B. Discussions
C. Specifications
D. Technician Guide
070-489 pdf Answer: C
Question No : 22 What component of a Mac mini (Early 2009) logic board requires use of an anti-static foam
support to avoid damage?
A. EMI clips
B. Video card
C. Large heat sink
D. Battery connector
Answer: A
Explanation:
1. Be careful not to damage EMI clips on underside of logic board. Place board on
antistatic foam when boardis not in a computer.
2. Important: Return logic board to Apple service in correct logic board packaging and with
antistatic foamprotecting EMI clips (shown in second photo).
If you are still worrying about passing some IT certification 70-489 dumps exams, please choose https://www.pass4itsure.com/70-489.html dumps to help you.
Read More Youtube:https://youtu.be/__Lkfs_jUmQ